(90) DelPro 1638 Interlocking PVC Wall & Ceiling Panels, 16" x 3/8" x 24' - Full Pallet, 2,880 sq ft, NEW | Plant-Direct, FOB Origin

FULL PALLET LOT - 90 pieces of DelPro 1638 interlocking PVC wall and ceiling panel, 16" wide x 3/8" thick x 24' long (plus or minus 1/2"), bright white. Brand new, factory packaged, never installed. Approximately 2,880 sq ft of finished wall or ceiling.

DelPro 1638 is a rigid interlocking tongue and groove wall and ceiling panel extruded from 100% exterior grade virgin PVC. The interlock hides every fastener, so the finished surface reads as one continuous seamless wall with no exposed screws and no painting. Closely spaced non-angled internal divider walls tie the face and back sheets together, which is why a 3/8" DelPro panel is more rigid and more impact resistant than a typical 1/2" panel. 16" is the widest width the industry can run without bowing or sagging under insulation load.

WHERE IT IS USED

- Car washes and wash bays

- Dairy, hog and poultry barns

- Meat processing and food packaging plants

- Dog kennels and riding stables

- Refrigerated warehouses and cold storage

- Commercial kitchens

- Garages, shops and pole barns

- Swim facilities and marinas

WHY BUYERS CHOOSE DELPRO 1638

- CFIA approved

- Class A fire rated per manufacturer literature; test documentation available on request

- Mold and mildew resistant; will not rot, delaminate or absorb water

- Hidden fastener tongue and groove system, no exposed screws

- No painting required, no backing required on interior walls

- Washes down with mild detergent, soap scum remover or a low pressure washer

- 100% recyclable, manufactured in a zero waste facility

- Made in North America by Delcan Manufacturing Ltd.

SPECIFICATIONS

Panel width: 16"

Panel thickness: 3/8"

Interior wall thickness: 0.04"

Panel length: 24' (plus or minus 1/2")

Color: Bright white

Material: 100% exterior grade virgin PVC

Profile: Interlocking tongue and groove, hidden fastener

Coverage per panel: approx. 32 sq ft

Weight: 24 lbs per panel, approx. 2,160 lbs per pallet

Pallet quantity: 90 pieces

Manufacturer part number: MNP19538-000

Manufacturer: Delcan Manufacturing Ltd.

FASTENERS AND ACCESSORIES (not included)

Wood: DelPro #8 x 1" trusshead screw. Concrete: 3/16" x 1-3/4" flathead. Metal: #10-16 x 1" pan socket. Adhesive: LePage PL200. Sealant: SIKA Sikasil SG-10. Matching J-trim, inside cove, outside corner, H-trim base and cap, and double-J trim are listed separately.

MAINTENANCE

Wipe down with a soft brush or damp cotton cloth. Clean with a mild detergent, soap scum remover, low pressure washer or low heat steam. Do not use abrasive cleaners, solvent based cleaners or products containing caustic acid.

WARRANTY

Manufacturer warranty terms are being confirmed and are not advertised with this lot. Ask before bidding if warranty coverage matters to your project.

SHIPS PLANT-DIRECT - FOB ORIGIN

This lot ships direct from the manufacturer, FOB origin. Lead time is 3 to 4 weeks. Freight is not included: the buyer arranges it, or we can have it quoted through our supplier's freight broker, who usually turns a number around in minutes. Hot shot delivery is available for long material. Panels and trim run 16 to 24 feet, so this moves by flatbed, hot shot or a carrier that accepts long-length freight, never parcel. Contact SecondBloom before bidding and we will get you a delivered number to your ZIP.

Full unit packs only. Lots are not broken or repacked.

CONDITION: NEW - factory stock, never installed.